NANOTEXT COLOR SWATCHES Pebble Alaçatı Marbled Desert Beige Canyon Ihlara Mink Oyster White Light Cream Cream Dark Cream Light Salmon Salmon Snow White Ice White Smoke Grey Pistachio Platue Green Symphonic Blue Boran North Ilgım

DESCRIPTION : Produced with nanotechnology, water based, decorative exterior paint.
PROPERTIES : Thanks to its photocatalytic property, nano-particles and the porous nature of the resin that provide easy cleaning of organic pollutants and salts. It is able to clean itself with the help of light. Salts formed on the surface is cleaned with wind or rain water. High water permeability, allowing building to breathe. It has high resistance against sunlight, humidity, alkali, salt humidity on coastal areas and negative effect of rain. It has superior opacity.
APPLICATION AREAS : All types of exterior mineral facades; masonry, concrete, plaster, brick, tile, asbestos, cement etc.

Surface Preparation:
Dirt, grease, old loose or flaking materials must be removed from the surfaces. Old painted, weak and chalky surfaces to be cleaned. Cracks etc. to be repaired with Dyo Acrofiller Wall Putty Exterior
New mineral surfaces to be primed  one coat with Nanotex Pigmented Primer.
Old, weak, limed surfaces and chalky substrates to be pre-treated with Dyobinder. Never use isolation primer.
If the application will be on the cement based decorative plaster, Dyobinder should be used as a primer

•Nanotex should be applied 24 hours after primer application. It is diluted with 10-15 % with water and can be apply 2 coats with brush, roller and spray. Wait min. 6 hours between the coats.
•The application shouldn’t be done at rainy, windy and hot weather.

Depending on the surface;
•When Nanotex Pigmented Primer is used; 9,0-10,5 m²/L and 6-7 m²/kg for one coat.
•When Dyobinder is used; 7,5-9,0 m²/L and 5-6 m²/kg for one coat.
S2  Keep out of the reach of children.