TEKNOTEX COLOR SWATCHES Pabble Alaçatı Desert Beige Canyon Ihlara Mink Oyster White Light Cream Cream Dark Cream Yellow Light Salmon Salmon Snow White Ice White Smoke Grey Pistachio Platue Green Symphonic Blue Boran North Classic Lilac Lavender Ilgım Paris Pink Pastel Ruddle Baraque Red Peach Sunflower Honey Bubble Dark Brick Goreme

DESCRIPTION : Water borne exterior paint with PTFE, based on acrylic emulsion.
PROPERTIES :Thanks to PTFE additive, it has high dirt and water repellent property that provide rain to slide away without wetting the wall. High water permeability, allowing building to breathe.It has high resistance against sunlight, humidity, alkali, salt humidity on coastal areas and negative effect of rain. It has superior opacity, provides consumption advantage of the paint.
APPLICATION AREAS: All types of exterior mineral facades; masonry, concrete, plaster, brick, tile, asbestos, cement etc.

Surface Preparation:
Dirt, grease, old loose or flaking materials must be removed from the surfaces. Old painted, weak and chalky surfaces to be cleaned. Cracks etc. to be repaired with Dyo Acrofiller Wall Putty Exterior
New mineral surfaces to be primed  one coat with Teknotex Pigmented Primer..
Old, weak, limed surfaces and chalky substrates to be pre-treated with Dyobinder. Never use isolation primer.
If the application will be on the cement based decorative plaster, Dyobinder should be used as a prime

•Teknotex should be applied 24 hours after primer application. It is diluted with 10-15 % with water and can be apply 2 coats with brush, roller and spray. Wait min. 6 hours between the coats.
•The application shouldn’t be done at rainy, windy and hot weather.

Depending on the surface;
•When Teknotex Pigmented Primer is used; 8,5-10 m²/L and 6-7m²/kg for one coat.
•When Dyobinder is used; 7-8,5 m²/L and 5-6 m²/kg for one coat.

S2  Keep out of the reach of children.