DYOTEN CLASSIC COLOR SWATCHES Urgut White Silvery Hawai Blue Dirty Pink Vivid Orange Dust Grey Sandy New Ivory Pearly Grey Turquoise Blue Bead Violet Vivid Red Aluminum Grey Champagne Light Cream Fume Green Navy Blue Cherry Light Brown Grey Oxide Yellow Chrome Yellow Khaki Cool Green Dark Blue Purple Dark Brown

DESCRIPTION: Alkyd based solvent-borne semi-matt paint.
PROPERTIES:It has high opacity, good leveling and non-yellowing properties. It provides easy brush application; it’s resistant to physical and chemical effects.
APPLICATION AREA: Wood and metal exterior and interior plus interior pretreated mineral substrates like walls, windows and doors.

APPLICATION METHOD:
Surface Preparation:
Wall surfaces:Cracks etc. must be repaired with Dyorit İc Cephe Duvar Macunu (550-) , then should be pretreated with Dyobinder or Universal Binder for one coat. After one day, Dyo Kivastar (513-) should be applied to the surface. If needed, repairing should be done by using thin sandpaper.
“Isolation primers should not be used for priming”
Other surfaces: After repairing, firstly Dyo Kivastar and then Dyoten Classic should be applied to the wood and metal surfaces.
Old painted surfaces: Absorbent surfaces like synthetic or plastic emulsion paints -applied on Dyorit or satin plaster- should be repaired by firstly putty, then primed with Dyo Universal Binder. After these applications, Dyo Kivastar and Dyoten Classic should be applied to the surface.
Painting:
Stir well before use, dilute with 5 % (by volume) of Dyo Sentetik Tiner (811-) for brush and roller applications.
Two coats are applied with one-day break between coats.
Tools can be cleaned with Dyo Sentetik Tiner.

 


APPLICATION METHOD:
Surface Preparation:
Wall surfaces:Cracks etc. must be repaired with Dyorit İc Cephe Duvar Macunu (550-) , then should be pretreated with Dyobinder or Universal Binder for one coat. After one day, Dyo Kivastar (513-) should be applied to the surface. If needed, repairing should be done by using thin sandpaper.
“Isolation primers should not be used for priming”
Other surfaces: After repairing, firstly Dyo Kivastar and then Dyoten Classic should be applied to the wood and metal surfaces.
Old painted surfaces: Absorbent surfaces like synthetic or plastic emulsion paints -applied on Dyorit or satin plaster- should be repaired by firstly putty, then primed with Dyo Universal Binder. After these applications, Dyo Kivastar and Dyoten Classic should be applied to the surface.
Painting:
Stir well before use, dilute with 5 % (by volume) of Dyo Sentetik Tiner (811-) for brush and roller applications.
Two coats are applied with one-day break between coats.
Tools can be cleaned with Dyo Sentetik Tiner.

 


DRYING TIME (25oC):Tack free: 2 hours, dust-free: 4 hours, hard-dry: 8 hours.
SPREADING RATE:13-15 m²/L, 10-11 m2/kg area is covered dependent on the substrate for single coat.
SAFETY PHRASES:S2  Keep out of the reach of children.S16 Keep away from sources of ignition - No smoking.S23 Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
S29/56 Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point.S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.S46 If swallowed, seek medical advice immediately and show container or label.
RİSK UYARISI :R10 Flammable.R65 Harmful: may cause lung damage if swallowed.