DESCRIPTION:Solvent borne, surface protector for indoor/outdoor surfaces.
PROPERTIES :Thanks to PTFE additive, it provides protection without changing the external appearance of the surfaces like pressed brick, stone, concrete and plaster. It’s water repellent and it’s resistant to sunlight and atmospheric conditions.
APPLICATION AREA :It is applied on absorbant surfaces like stone, brick, concrete to prevent all contamination.It shouldn’t be used on non-absorbant surfaces like granite and marble.

Surface Preparation:
• Dirt, grease, old loose or flaking materials and mould growth must be removed.
•• However if the salt formation on the surface continues no application should be made until the reasons causing that are eliminated.
• •Ready to use, should not be diluted. Apply one coat with brush, roller or spray gun

DRYING TIME (25ºC): 24 hours.
SPREADING RATE :: 6-8 m2/L, 7-9 m2/kg for one coat depending on the surface.
SAFETY PHRASES: S2 Keep out of the reach of children.S16 Keep away from sources of ignition - No smoking.S23 Do not breathe gas/fumes/vapour/spray S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.S46 If swallowed, seek medical advice immediately and show container or label.S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
RISK PHRASES:R10 Flammable.R40 Limited evidence of a carcinogenic effect.R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environmentR65 Harmful: may cause lung damage if swallowed.